AI Racing League Car Box Checklist¶
Donkey Car NVIDIA Kit¶
Car Name: ____
Mac Address: ____
Static IP Address: ___
- [ ] RC Car with the following components
-
[ ] RC Car Battery Charger (7.2v NiMh)
-
[ ] Pi Camera Module V2 with 3D printed chassis
- [ ] 128GB micro SD card (inserted in Nvidia Nano) (2)
- [ ] RC Car Battery (7.2v NiMh)
- [ ] Nvidia Nano with 4GB RAM
-
[ ] Ankar 5v 6800mHA battery with charging cable - note draws 900ma when charging so use a 1ft high current USB cable.
-
[ ] 2.5 amp 5v barrel connector for desktop use of Nvidia
- [ ] Jumper for enabling the barrele connector
- [ ] WiFi Dongle (plugged into the car) or AC8265
- [ ] Logitech F710 Joystick (dongle plugged into the car) - names on both Joystick and dongle
- [ ] Mouse
Optional Accessories (not in the box) 1. [ ] Keyboard 1. [ ] External Monitor
Nvidia Nano Serial Number: ________
Nvidia Nano Purchase Date: December 12, 2019
Raspberry Pi DonkeyCar Kit¶
- [ ] RC Car with separate ESC and Servo Connectors
- [ ] RC Car Battery Charger (7.2v NiMh)
- [ ] 7.2 volt battery with Tamiya connector
- [ ] 3D Printed Chassis
- [ ] with 3 large screws for roll-bar to base
- [ ] 8 smaller screws for attaching the PI and PWM board to base
- [ ] Raspberry Pi
- [ ] Board with 4GB RAM
- [ ] 3A Power with USB C Connector
- [ ] Keyboard
- [ ] Mouse
- [ ] VGA Connector
- [ ] PWM Board
- [ ] Camera
- [ ] 4 Female-Female Dupont Connectors
- [ ] USB Battery Pack (6,000 to 10,000 milliamp hours)
- [ ] 1 ft USB A to USB C
- [ ] Extra 7.2 volt battery for RC Car with mini Tamiya
Miscellaneous Parts¶
- Digital Volt-Ohm Meter ($10)
- Extra Tamiya Style Connectors Amazon Link